Tag Archives: pin clip

Floor heating in Canada, Russia, Japan, Korea and other countries has been widely popular, relatively speaking, floor heating technology in China is relatively low prevalence. But with the improvement of living standards and the prevalence of environmental consciousness, the past few years, to warm gradually into the homes of ordinary people, as more and more families to bring energy saving and healthy method of heating. Floor heating are more and more people like it floor in our room for market development is enormous.
    Korean traditional floor heating is the heating mode, the rate of adoption in South Korea close to 100% in recent years, China imported from South Korea to warm technology. At present, to warm the Ministry of Construction was listed as key promotional items, as compared to warm radiator heating save a lot of energy, environmental protection, health, save construction costs, save floor space, the construction is simple, short construction period, the life of warm-up also 50 years, etc., simultaneously warm line "hot head cold feet" of the human physiology, is the most advanced way of heating.

    Experts, the current main methods of low-temperature floor heating hot water floor heating and low-temperature radiant heating cable heating system two. Low temperature hot water floor heating is a temperature no higher than 60 ℃ hot water as heat medium, circulating in the heating pipe, heating floor, through the ground to radiation and convection heat transfer heat to the interior of the heating, and said geothermal. Low temperature hot water floor heating technology to the laying of concrete on the floor inside the hot water heating coil to the floor to achieve uniform heat radiation to the indoor heating purposes. Heating cable is a low-temperature radiant heating system, electrical energy, heating cables to heat the body, 100% of the energy is converted to heat, and heat inside the building as the ground surface, heating the surrounding air by convection.

Use the advantages of floor heating is very clear:

    1 Efficiency: use of geothermal heating in the hall when the temperature distribution along the height direction of the more uniform temperature gradient is small, reducing the heat loss is invalid. Practice has proved that geothermal heating room, higher thermal efficiency, heat concentrated in the height of human benefit. Meet the warm and comfortable in the same conditions, the floor heating temperature is set lower than other heating methods 2 ~ 3 ° C, the relevant technical information, such as the indoor temperature reduced by 1 degree Celsius can be saving nearly 10%. Use of water source heat pump or ground source heat pump for floor heating, cooling, electricity consumption per square meter installed not more than 15W / m, lower than the air 30 ~ 50W / m, which can effectively alleviate the summer power shortage situation. As the floor itself is radiating heat, thus reducing the envelope nearly one fifth of the cold absorbing energy.

    2 Temperature uniformity: low-temperature radiant floor heating the heating pipes buried in the ground, increasing surface temperature, the indoor heat, which, at 1.8 meters to form a hot gas layer. This will not only ensure that at room temperature, but also enables uniform temperature distribution in the whole hall.

    3 comfortable and beautiful: the ideal heating: the heating efficiency of human health and the best effect is to gradually cools from the way, radiant floor heating is the closest to the ideal heating, space heating mode for warm, indoor surface temperature uniformity, the indoor temperature is gradually decreasing from the bottom up, warm head and cool feet gives a good feeling. When people stranded in the warm floor, the feet warm and cold radiation from the upper body and the role, it is very comfortable. Room temperature uniformity, temperature less reasonable gradient, heating the body most likely to feel the cold foot area, meet the needs of human physiology; do not take up interior space, fully renovated show personality.

    4 maintenance cost savings: radiant floor heating, just regular cleaning filters, because all the floor heating coil Buried in the floor, so the heating operation, if not the destruction, there is almost no maintenance problems, the service life of 50 years, non-corrosive, non-scaling, saving maintenance costs.

    5 environmental noise: At present, China is generally used in precast floor panels or in-situ plate, the sound effect is not very satisfactory, with increased floor heating insulation layer, with very good sound insulation, can reduce noise pollution.

    6 Health and Safety: do not cause indoor air convection generated dust emissions, reduce air pollution, eliminating dust and cooling equipment and piping volatile odor; use 40 ~ 60 ° C low temperature hot water heating, to avoid burns.
    Floor heating method is the gradual rise in recent years new building materials industry in the market at the outset by many consumers. Despite the high cost of heating, flooring, maintenance is relatively difficult, but enough to make up for all the obvious advantages. We can say that the future housing market heating floor heating system is the development direction of the floor will be the future of the market force.